West Midlands regional pricing

How Much Does a Plumber Cost in Nuneaton and Bedworth?

Updated prices for . Nuneaton and Bedworth prices are typically 12% below the national average.

14 services priced
West Midlands region
Updated

Price summary

Nuneaton and Bedworth Price Summary

Service Low Average High
Fix a Leaking Tap £45 £115 £175
Unblock a Drain or Toilet £65 £130 £220
Install a Bathroom Suite £655 £1,095 £1,750

Prices include labour and materials. VAT may apply. Based on West Midlands regional pricing.

Full pricing

All Plumber Prices in Nuneaton and Bedworth

Nuneaton and Bedworth is in West Midlands and plumber costs here are 12% below the national average. Prices are based on real regional wage data from the Office for National Statistics.

All prices include materials and labour unless stated otherwise. Prices verified 2026

Fix a Leaking Tap

Low

£45

Average

£115

High

£175

30-60 minutes

More details

Fixing a dripping or leaking tap by replacing the worn-out internal parts. Covers bathroom, bath, or kitchen taps. Usually a quick job done in a single visit.

~86% labour, ~14% materials

What affects the price

  • Type of tap (mixer, monobloc, traditional)
  • Whether replacement parts are readily available
  • Accessibility of the tap and isolation valves
  • Whether the tap body itself needs replacing

Unblock a Drain or Toilet

Low

£65

Average

£130

High

£220

30-90 minutes

More details

Clearing a blocked sink, toilet, bath or external drain using rods, a plunger or a drain snake. Does not include CCTV surveys or excavation.

~93% labour, ~7% materials

What affects the price

  • Severity and location of the blockage
  • Whether specialist equipment (jetting) is needed
  • Internal vs external drain
  • Ease of access to the pipework or manhole

Install a Bathroom Suite

Low

£655

Average

£1,095

High

£1,750

2-3 days

More details

Fitting a new bathroom suite including toilet, basin and bath or shower tray. Plumbing connections only — does not include tiling or plastering.

~40% labour, ~60% materials

What affects the price

  • Number of items in the suite
  • Whether existing pipework needs modifying
  • Accessibility of the bathroom
  • Whether old suite removal and disposal is included

Replace a Toilet

Low

£90

Average

£175

High

£305

1-2 hours

More details

Removing an old toilet and fitting a new one. Includes connecting to the existing waste pipe and water supply. Most standard toilets can be swapped in 1-2 hours without any major pipework changes.

What affects the price

  • Type of toilet (close-coupled, wall-hung, back-to-wall)
  • Whether the waste pipe position needs changing
  • Condition of the existing floor and connections
  • Whether a concealed cistern is required

Install a Shower

Low

£265

Average

£700

High

£1,315

4-8 hours

More details

Installing a new electric, mixer or thermostatic shower including tray, screen, valve and plumbing connections. Price varies significantly by shower type.

~56% labour, ~44% materials

What affects the price

  • Type of shower (electric, mixer, power shower)
  • Whether a new tray and enclosure are needed
  • Existing water pressure and supply
  • Whether tiling or waterproofing is required

Fix or Replace a Radiator Valve

Low

£45

Average

£105

High

£175

30-60 minutes

More details

Replacing a faulty or leaking radiator valve, or upgrading to thermostatic valves that let you control the temperature in each room individually. Price is per valve.

~75% labour, ~25% materials

What affects the price

  • Type of valve (manual, TRV, smart TRV)
  • Whether the system needs draining
  • Accessibility of the radiator and pipework
  • Whether pipework modifications are needed

Repair a Burst Pipe

Low

£90

Average

£220

High

£440

1-3 hours

More details

Emergency repair of a burst or leaking water pipe. Includes isolating the supply, cutting out the damaged section and fitting a new pipe or coupling.

~82% labour, ~18% materials

What affects the price

  • Location of the burst (exposed vs under floor/in wall)
  • Pipe material (copper, plastic, lead)
  • Whether it is an emergency call-out
  • Extent of water damage requiring additional work

Install a Dishwasher or Washing Machine

Low

£35

Average

£90

High

£175

30-60 minutes

More details

Connecting a new dishwasher or washing machine to the existing water supply and waste pipe. Assumes connections are already in place.

~77% labour, ~23% materials

What affects the price

  • Whether existing plumbing connections are in place
  • Distance from water supply and waste pipe
  • Whether new valves or waste fittings are needed
  • Integrated vs freestanding appliance

Replace Taps (Basin or Bath)

Low

£70

Average

£130

High

£265

1-2 hours

More details

Removing old taps and fitting new ones on a basin or bath. Includes connecting to the hot and cold supply and checking for leaks.

~23% labour, ~77% materials

What affects the price

  • Type of taps (pillar, mixer, monobloc)
  • Accessibility beneath the basin or bath
  • Whether isolation valves need fitting
  • Condition of existing pipework and fittings

Fix a Dripping Overflow

Low

£45

Average

£105

High

£175

30-60 minutes

More details

Fixing a dripping overflow pipe — the small pipe that sticks out of your wall and drips water. This is usually caused by a faulty valve inside the toilet or the cold water tank in the loft that is not shutting off the water properly.

~85% labour, ~15% materials

What affects the price

  • Whether the issue is in the toilet cistern or loft tank
  • Ease of access (especially loft tanks)
  • Whether a new ball valve or float valve is needed
  • Whether the overflow pipe itself needs replacing

Install an Outside Tap

Low

£70

Average

£130

High

£220

1-2 hours

More details

Fitting a new garden tap on the outside wall by connecting it to your indoor cold water supply and drilling through the wall. Includes a safety valve to stop garden water flowing back into your drinking water. Takes 1-2 hours.

~73% labour, ~27% materials

What affects the price

  • Distance from the nearest water supply pipe
  • Wall thickness and material (brick, stone, render)
  • Whether a non-return valve is required by regulation
  • Whether pipework needs to be run externally

Repair or Replace a Ball Valve

Low

£45

Average

£90

High

£160

30-60 minutes

More details

Replacing the valve that controls the water level in your toilet cistern or the water tank in your loft. When this valve wears out, the tank overflows or the water does not fill up properly.

~77% labour, ~23% materials

What affects the price

  • Location of the valve (cistern vs loft tank)
  • Type of valve (brass, plastic, part 1, part 2)
  • Whether the water supply can be easily isolated
  • Ease of access in a loft or airing cupboard

Full Bathroom Refit

Low

£2,630

Average

£5,255

High

£10,510

1-2 weeks

More details

Complete bathroom renovation including stripping out the old room, fitting new suite, tiling, flooring, plastering and all plumbing and electrical work.

~50% labour, ~50% materials

What affects the price

  • Size and layout of the bathroom
  • Quality of fixtures and fittings chosen
  • Whether the layout is changing (moving waste pipes etc.)
  • Amount of tiling, plastering and electrical work needed

Install Underfloor Heating (Per Room)

Low

£875

Average

£2,190

High

£3,940

1-3 days

More details

Installing underfloor heating in a single room. You can choose electric mats (simpler to install) or a water-based system connected to your boiler (cheaper to run). Includes insulation boards underneath and all connections. Based on an average room of 15-20 square metres.

~52% labour, ~48% materials

What affects the price

  • Type of system (electric mat vs wet/water-based)
  • Room size and floor construction
  • Whether the floor needs raising or excavating
  • Insulation and screed requirements

Step by step

What's Involved in Hiring a Plumber

From a dripping tap to a full bathroom installation, knowing what to expect when hiring a plumber helps you get the right person for the job and avoid being overcharged.

1

Describe the problem clearly

Before calling, take note of exactly what is happening — where the leak is, when the problem started, whether it is constant or intermittent. Take photos or a short video. The more detail you give, the more accurately the plumber can quote and the right parts can be brought to the first visit.

2

Find a qualified plumber

For general plumbing work, check reviews on Checkatrade, MyBuilder, or Google. For anything involving gas, the plumber must be Gas Safe registered — check their ID card number on the Gas Safe Register website. Ask friends and neighbours for recommendations, which is still the most reliable way to find a good plumber.

3

Get a quote or call-out rate

For small repairs, most plumbers charge a call-out fee plus an hourly rate. For bigger jobs like bathroom installations, ask for a fixed-price quote in writing. Get two or three quotes for any job over £500. Make sure the quote specifies whether materials are included or just labour.

4

The plumber diagnoses and fixes

For repairs, the plumber isolates the water supply, diagnoses the fault, and carries out the fix. Common jobs like tap repairs and toilet fixes are usually done in a single visit. More complex work like re-routing pipework or installing a bathroom is scheduled over several days.

5

Testing and clean-up

The plumber turns the water back on and checks all connections for leaks. Taps are tested, toilets are flushed, and any new pipework is pressure-checked. A good plumber cleans up after themselves and leaves the work area tidy. Check everything works before they leave.

Regional comparison

How Nuneaton and Bedworth Compares

Average cost of fix a leaking tap across regions.

Nuneaton and Bedworth
-12% £115
National Average
baseline £130
London
+24% £160

Local insights

What Affects Plumber Costs in Nuneaton and Bedworth?

The West Midlands has a wide range of housing types, from Victorian terraces and back-to-backs in the Black Country to inter-war semis, post-war council estates, and canal-side conversions. Nuneaton and Bedworth has a range of property types and ages that can affect the scope and cost of work, and surrounding areas like Solihull and Coventry include properties of varying ages and conditions. With a population of null, Nuneaton and Bedworth is a area where plumber costs are one of the most affordable areas. Red brick properties with older infrastructure generally cost more for plumber work — for example, unblock a drain or toilet here averages around £130.

The West Midlands sits slightly below the national average for trade costs, making it one of the more affordable areas for plumber work. Labour rates in Nuneaton and Bedworth are around 12% below the UK average. In Nuneaton and Bedworth, local demand for plumber services varies depending on the mix of residential and commercial properties in the area. The dense urban areas around Wolverhampton and Dudley support a good number of tradespeople. With fewer tradespeople based locally, you may find slightly less choice, and it is worth booking ahead for larger jobs. Prices still vary by 30-50% between tradespeople for the same job, so always get multiple quotes.

What you pay for plumber work in Nuneaton and Bedworth depends on the job complexity, materials chosen, and the condition of your property. Older terraces and back-to-backs common in the Black Country can have limited rear access and solid walls that make work more involved and expensive. A typical fix a leaking tap in Nuneaton and Bedworth costs around £115, while full bathroom refit ranges from £2,630 to £10,510. As a area that is one of the most affordable areas, Nuneaton and Bedworth offers reasonable value compared to the South East. Material choices also make a significant difference to the total.

When getting quotes in Nuneaton and Bedworth, aim for at least three from different qualified professionals. Ask each one to visit and assess the work rather than quoting over the phone. A good plumber will check the existing conditions, identify potential complications from older property layouts, and give you a detailed breakdown of costs. With fewer tradespeople based locally, you may find slightly less choice, and it is worth booking ahead for larger jobs. Be wary of significantly cheaper quotes — they may cut corners on materials or quality. Always check qualifications, insurance and recent reviews before hiring.

Depending on the work involved, you may also need boiler & gas engineering (£1,750–£3,940), electrician (£3,505–£7,010), or bathroom fitting (£3,940–£10,510) in Nuneaton and Bedworth.

Common questions

Frequently Asked Questions

Common questions about plumber costs in Nuneaton and Bedworth.

Do I need a Gas Safe registered engineer for plumbing work?
Standard plumbing work like fixing taps, unblocking drains or fitting a bathroom does not require Gas Safe registration. However, any work involving gas appliances, gas pipework, or boilers must be carried out by a Gas Safe registered engineer. If in doubt, always ask before the work starts.
What is the difference between a plumber and a heating engineer?
A plumber handles water supply and drainage — taps, toilets, baths, showers, waste pipes and water tanks. A heating engineer specialises in central heating systems, boilers, radiators and gas work. Many tradespeople are qualified as both, but for boiler or gas work specifically, you need someone who is Gas Safe registered.
Why does my boiler keep losing pressure?
The most common causes are a small leak somewhere in the heating system (often at radiator valves or pipe joints), a faulty pressure relief valve, or a problem with the expansion vessel. If you are topping up the pressure more than once a month, call a heating engineer to find and fix the root cause rather than just re-pressurising.
Should I get a power flush before installing a new boiler?
A power flush cleans out sludge, rust and debris from your radiators and pipework. Most boiler manufacturers recommend or require it before installing a new boiler to protect the warranty. If your radiators have cold spots at the bottom, the system almost certainly needs flushing. Expect to pay around 300-500 for a typical 3-bed house.
How much does a plumber charge per hour in the UK?
Most plumbers charge between £40 and £80 per hour depending on your area, with London rates reaching £80-£100. Many charge a minimum call-out fee of 1 hour regardless of how quick the job is. For larger jobs, always ask for a fixed price rather than an hourly rate to avoid surprises.
What should I do if I have a plumbing emergency?
First, turn off the water at the stopcock (usually under the kitchen sink). If water is near electrics, switch off the power at the consumer unit. Contain any flooding with towels and buckets. Then call an emergency plumber — most offer 1-2 hour response times. Knowing where your stopcock is before an emergency saves precious minutes.
Do plumbers fix boilers?
General plumbers handle water supply and drainage work. Boiler repairs, servicing, and installation must be done by a Gas Safe registered heating engineer. Some plumbers hold both qualifications, but always check. If a plumber offers to work on your boiler without showing you a valid Gas Safe card, do not let them proceed — it is illegal and dangerous.
How do I find my stopcock?
The internal stopcock is most commonly under the kitchen sink, but can also be in a downstairs cupboard, under the stairs, or in a utility room. It is a brass or chrome tap that turns clockwise to shut off the water to your home. If you cannot find it, check the pavement outside your property for the external stopcock under a small metal cover.
Can a plumber install a bathroom or is that a different trade?
A plumber can install all the plumbing elements of a bathroom — toilet, basin, bath, shower, and taps. However, a full bathroom refit also involves tiling, plastering, electrics, and flooring, which may require separate tradespeople. Some plumbers offer a complete bathroom fitting service with subcontractors, while others handle only the plumbing side.
How much does a plumber cost in Nuneaton and Bedworth in 2026?
Fix a Leaking Tap in Nuneaton and Bedworth typically costs between £45 and £175, with the average being around £115. Prices vary depending on the scope of work, materials used, and the specific requirements of your property.
Are plumber prices cheaper in Nuneaton and Bedworth than London?
Yes. Nuneaton and Bedworth plumber costs are typically 12% below the national average, while London prices run around 24% above it. For fix a leaking tap, you could save over £45 compared to the same job in London.
How do I find a good plumber in Nuneaton and Bedworth?
Get at least three quotes from different tradespeople, check recent reviews, and ask whether the quote includes VAT and everything you need. A detailed written quote that breaks down all costs is a good sign. Always check qualifications, insurance and recent reviews before hiring.
What affects plumber prices in Nuneaton and Bedworth?
The main factors are the scope and complexity of what you need, the options and products chosen, and local market rates. Nuneaton and Bedworth rates are 12% below the national average. Getting multiple quotes is the best way to ensure a fair price.
Do plumber prices include materials in Nuneaton and Bedworth?
The prices shown on this page include all typical costs. However, when getting real quotes, always confirm what is and isn't included. Some tradespeople break out costs separately, while others give an all-in price. Ask for a detailed breakdown before agreeing to any work.